K-Tuned Oil Pressure Sensor Adapter

The K-Tuned Oil Pressure Sensor Adapter is a must-have when you're adding extra oil sensors or need to easily set up a feed line. It features a 1/8BSPT male thread that perfectly matches Honda blocks. This adapter comes with several great features for easy installation and problem prevention. There are three 1/8NPT thread ports around the body, allowing you to choose the best direction for your fitting or sensor. We've kept the stock 1/8BSPT thread to match the stock sensor. The two-piece design uses a double o-ring seal to completely prevent leaks. The jam nut offers additional support, which is essential when moving the sensor or adding more sensors away from the block. The kit includes extra o-rings and two 1/8NPT plugs. Application: 1/8 BSPT Thread. Features: 1/8 BSPT Thread, Matches with stock sensor. Note: It's recommended to use teflon tape on all tapered threads (NPT and BSPT). Comes with extra O-Ring and 2 x 1/8 NPT plugs.

Using the K-Tuned Oil Pressure Sensor Adapter is easy. First, make sure you have all the parts in the kit, including the extra o - rings and 1/8NPT plugs. When installing, use teflon tape on all the tapered threads (both NPT and BSPT) as recommended. The adapter has three 1/8NPT thread ports, so you can pick the best direction for your fitting or sensor according to your needs. The double o - ring seal in the two - piece design helps prevent leaks, but always check for any signs of leakage after installation. If you need to move the sensor or add more sensors further from the block, the jam nut provides extra support. For maintenance, regularly check the o - rings for wear and tear. If they look damaged, replace them with the extra o - rings in the kit. Keep the adapter clean and dry to ensure its long - term performance.