Product Description
The K-Tuned Premium High-Flow Fuel Filter with 10AN Inlet/Outlet is a universal solution for just about any AN fuel system. Its hard anodized finish allows it to work with all fuels, including alcohol, E85, and other race fuels. A good fuel filter is crucial for any fuel system as it filters out debris and contaminants before they reach the fuel injectors. K-Tuned's high-flow fuel filters come in two size options to meet the fuel demands of street cars and race cars. Made from 6061 aluminum, they are suitable for all types of fuels, thanks to the hard anodized body and high-quality stainless steel mesh filters. The female o-ring ports can be easily connected to any fuel line using standard AN port adapters. Each filter comes with a 100-micron filter, and a 30-micron filter is available for specific applications. If you're using an aftermarket fuel pump, check the pump manufacturer's specs for filter micron ratings. The 8AN filter is 1.25 inches in diameter and 3.5 inches in length, while the 10AN filter is 2 inches in diameter and 5.5 inches in length (excluding end adapters). Port adapters are sold separately by K-Tuned. Here's a general HP guide for filter selection, but remember to consider the fuel pump, injectors, and line size as they can increase potential HP numbers.
Using your K-Tuned High-Flow Fuel Filter is easy. First, choose the right size filter based on your vehicle's needs and the HP guide provided. Then, use standard AN port adapters to connect the filter to your fuel line via the female o - ring ports. Make sure the connections are tight to prevent any fuel leaks. If you're using an aftermarket fuel pump, double - check the pump's specs for the recommended filter micron rating. For maintenance, it's a good idea to inspect the filter regularly, especially if you're using it in a high - performance or racing environment. If the filter shows signs of clogging or excessive dirt, it's time to replace it. You can choose between the 100 - micron filter that comes with the product or the 30 - micron filter for finer filtering when needed. Keep in mind that the port adapters are sold separately, so make sure you have the right ones for your setup.
