Aeromotive Replacement Element, 40-m Fabric, for 12303/12353 Filter Assembly and all 1-1/4 OD Filter Housings

Don't overlook the fuel filter element! It's a small part, but neglecting it can lead to big problems. If not cleaned or replaced regularly, it can clog up, reducing fuel flow and hurting engine performance. This can even cause damage to your fuel pump or engine, leading to expensive repairs. Aeromotive suggests inspecting and servicing your filter elements once a year. Replace 10 - micron fabric elements and clean or replace 100 - micron stainless steel elements. Heavy - use or newly installed systems might need more frequent upkeep. Wondering which element your filter needs? Some Aeromotive filters have the same housing, but the internal elements can vary greatly. Putting the wrong one in can harm your fuel pump or engine. Check the inside of the filter inlet. The micron rating is stamped on top of the element, telling you exactly what you need. This replacement element is perfect for filter part numbers 12303 and 12353.

Using this Aeromotive replacement element is simple. First, identify the correct element by checking the micron rating stamped on the top of the old element inside the filter inlet. Once you've got the right one, remove the old element from your 12303 or 12353 filter assembly or 1 - 1/4 OD filter housing. Then, install the new 40 - m fabric element in its place. Here are some important things to note. Make sure you're using the correct element for your filter. Using the wrong one can cause damage to your fuel pump or engine. Also, avoid over - tightening when installing the element. For maintenance, Aeromotive recommends inspecting and servicing the filter elements annually. Replace 10 - micron fabric elements and clean or replace 100 - micron stainless steel elements. If you have a severe - duty application or a newly installed system, you may need to do this more often. Regular replacement and cleaning will help you avoid costly repairs and keep your engine running at its best.