This high - performance intake system fits all 2018+ Accord 2.0T models, including all variant models such as 10AT, 6MT, RHD, and international models. It is also compatible with the factory turbocharger inlet pipe. Check our other listings for the Turbocharger Inlet Pipe Conversion Hose. The system is patented (Patent No. D902,255). No ECU calibration is required. Our 2.0T Accord High Volume Intake system uses a 4' cone filter and a billet 2 - piece MAF housing with a velocity stack for maximum airflow and proper fuel trims. The HDPE rotomolded air box uses the factory air duct and seals against the integrated air box scoop for better airflow and less heat soak. Custom - molded 4 - ply silicone with receiving grooves allows all components to be safely attached without blocking airflow. The kit includes an HDPE Air Box Assembly, an Air Box Lid, a 2 - Piece MAF Housing, a 4' Air Filter, a 4 - Ply Silicone Intake Hose, an Injection Molded Evap Fitting, stainless mounting brackets, stainless steel liner clamps, an Air Duct Seal, OE - Style Push Clips, and stainless hardware.
Using this intake system is easy. First, gather all the parts from the kit. You'll find an HDPE air box assembly, an air box lid, and other components. Start by removing the old intake components from your 2018+ Honda Accord 2.0T. Then, install the new parts one by one. Attach the air filter to the 2 - piece MAF housing. Connect the 4 - ply silicone intake hose and make sure all the connections are secure. Use the provided stainless mounting brackets and hardware to hold everything in place. One important note: you don't need to do any ECU calibration. This saves you time and hassle. For maintenance, regularly check the air filter. If it looks dirty, clean or replace it. Also, inspect the silicone hoses and clamps for any signs of wear or damage. Make sure the air box seal is intact to keep out dirt and moisture. With proper use and maintenance, this intake system will enhance your car's performance for a long time.
