K-Tuned Front Camber Kit (UCA) S2000

Our front camber kit simplifies camber adjustment and proper car setup and alignment, whether you're a street driver or a racer. Worn bushings can significantly degrade your car's feel and handling. Replacing them and other suspension components can make an old car feel brand - new. Our rubber bushings are stiffer than OEM and built to last. Applications include 00 - 04 S2000 AP1 and 05 - 09 S2000 AP2. Please note that our K - Tuned Upper Camber Arms are for lowered cars only. Don't use them to correct camber on race cars higher than stock. The max tested drop is 3 inches lower than stock. Using it on a setup lower than 3 inches or higher than stock may damage the balljoint. Also, camber plate bolts should be torqued to 22ft - lbs.

Using this K - Tuned front camber kit is easy. First, install it on your 00 - 04 S2000 AP1 or 05 - 09 S2000 AP2. Then, you can adjust the camber to your preference for better driving performance. Remember, these arms are only for lowered cars. If your car is raised higher than stock or dropped more than 3 inches below stock, it may cause damage to the balljoint. When installing, make sure to torque the camber plate bolts to 22ft - lbs. For maintenance, regularly check the bushings for wear. Since our rubber bushings are stiffer than OEM, they should last a long time, but it's still good to keep an eye on them to ensure your car always handles well.