K-Tuned TSX/Accord Billet Shifter Base Plate

Applications: This high - quality base plate is suitable for K - Tuned TSX/Accord Shifter KTD - TSX - ACC and TSX/Accord OEM Shifter. It can also be used on a K - Swapped car with the newer 06 - 11 Civic Si transmission (K20Z3 transmission) or the K24 TSX or Accord Transmission. The K - Tuned Billet Shifter Base Plate is a top - choice for many racers, especially road - course racers. It mounts the shifter higher in the vehicle, bringing it closer to the driver and the steering wheel. This setup also leaves plenty of space under the car for large exhaust systems. The shifter base plate is designed to route shifter cables inside the car. Usually, users set them to exit through the heater hose hole in the firewall, assuming the heater core has been removed in most race cars. Note that this shifter setup won't clear interior panels or center consoles on any chassis.

Using the K - Tuned Billet Shifter Base Plate is straightforward. First, make sure your vehicle is either a K - Tuned TSX/Accord Shifter KTD - TSX - ACC or has a TSX/Accord OEM Shifter. If you have a K - Swapped car with a 06 - 11 Civic Si (K20Z3) or K24 TSX/Accord transmission, it will also work. Mount the shifter base plate to install the shifter higher in the vehicle. When routing the shifter cables, run them inside the car and out through the heater hose hole in the firewall. Remember, most race cars have the heater core removed. One important thing to note is that this setup won't fit well with interior panels or center consoles. For maintenance, regularly check the mounting bolts for tightness to ensure the shifter base plate stays securely in place.