Hybrid Racing Universal K-Series Swap Conversion Wiring Harness

• Universal K-Series engine swap conversion harness for a wide range of vehicles!
• New connectors and pins sourced from the same company as Honda, ensuring high - quality and reliability.
• Get free phone and email tech support to assist you throughout the process.
• Powering thousands of K-Swaps globally!

• Description
• Vehicle Fitment
• Install Guide

This Hybrid Racing Universal K-Series Swap Conversion Wiring Harness is for those looking to install a K-Series engine into non - Honda or hard - to - fit chassis. First, make sure your engine is a USDM / JDM 02 - 04 K - Series like K20A, K20A2, K20A3. European customers with UKDM K20A/K20A2 wiring harness will need to convert it for the narrowband sensor. It won't work with 05 - 06 or K24 engine wiring harnesses and ECU. Supply the harness with a constant 12v and switch 12v source. All wires are labeled and neatly packaged, but if you have any questions, just call our tech support. They can help with not only the harness but also your whole swap. For maintenance, keep the harness dry and check for any loose connections regularly. It interfaces easily with your factory dash harness, OEM K - Series engine harness, and K - Series ECU for a plug - and - play install.