Product Description
Rife presents the 1/4' NPT RIFE Liquid Temp Sensor M5 Connector 52 - 1213, an essential component for your EFI system. In an EFI setup, having an accurate, durable, and fast - acting sensor is crucial. A slow - reacting sensor can cause engine damage or tuning issues by providing incorrect data, preventing the ECU from operating safety features and tuning parameters properly. Most aftermarket EFI sensors are just re - labeled products from 80s and 90s factory tech with slow processing rates. But RIFE sensors are completely redesigned, using in - house made bodies and state - of - the - art sensor technology you can rely on. Key features include 1/4' NPT threads, a temperature range from - 20F to 300F, an M5 screw - on connector, faster response than traditional factory sensors in EFI systems, and higher accuracy. Mating connectors are not included. Note that unlike many Motion Raceworks products, these sensors are not 100% Made in the USA as sourcing all US electronic components has been challenging. To calibrate with aftermarket ECUs like Holley, Fueltech, or Haltech, refer to the setup sheets. If you need a different size or plug style, check out our full line of Liquid Temp Sensors.
Using your RIFE Liquid Temp Sensor is straightforward. First, make sure you have the appropriate 1/4' NPT fitting to install the sensor in the desired location, like where coolant, water, oil, trans fluid, or fuel is present. Then, connect the M5 screw - on connector to your system. Remember, mating connectors are not included, so you'll need to source them separately. When it comes to calibration, if you're using an aftermarket ECU such as Holley, Fueltech, or Haltech, refer to the provided setup sheets. This will ensure accurate readings. As for maintenance, keep the sensor clean from dirt and debris. Avoid exposing it to extreme conditions outside its - 20F to 300F temperature range, as this can affect its performance. If you notice any issues with the sensor's readings, it might be time to check the connections or consider replacing it. And if you need a different size or plug style, explore our full product line.
