This J-swap kit is a comprehensive solution for tuning your J series Honda engine. It includes the FlashPro (product code: FP - SWAP), a used and tested Honda ECU with a 1 - year warranty, a J - swap adapter harness, and detailed install instructions. Note that the engine, mounts, additional harnesses, or other extra parts are not included. Check the install instructions for the full parts list. The FlashPro offers full user tuning and datalogging for drive - by - wire J series MT V6 Honda engines. It comes with Windows - based FlashProManager software. Simply connect the FlashPro from your laptop's USB port to your vehicle's diagnostic port to enjoy live tuning with starting calibrations and great datalogging capabilities. The starting swap calibrations let you start the engine, but tuning is required. The FlashPro is permanently locked to the supplied ECU by Hondata, and customer - supplied ECUs are not supported. In the USA, this product is legal only for racing vehicles that can never be used on public highways. It can only be sold to US/Canada addresses. Key features include a programmable ECU interface, 10 PSI boost with the stock MAP sensor (43 psi with the optional Hondata 4 bar sensor), large injector calibration, OBDII diagnostic port connection, USB 2.0 connection, compatibility with laptops or desktops, no need for ECU modification, live tuning, 20 hours of on - board datalogging memory, a security password, FlashProManager Windows software, diagnostic code checking and clearing, custom laptop gauges, and dual calibration storage. Supported engines are 04 - 08 TL J32A3 and J35A8, 05 - 08 RL J35A8, 05 - 10 Odyssey LX and EX J35A6, 05 - 08 Pilot J35A6 and J35A9, 06 - 08 Ridgeline J35A9, and 03 - 06 MDX J35A5. VCM engines are not recommended. The dyno chart was created with a 3.2 TL engine, 100 octane fuel, and 50 psi WOT fuel pressure. Your power output will vary based on your engine setup, injectors, boost, and tuning.
Using the Hondata FlashPro J - swap kit is straightforward. First, refer to the included install instructions to assemble the necessary components. Make sure to use the provided J - swap adapter harness and connect it properly. Connect the FlashPro from your laptop's USB port to your vehicle's diagnostic port. Open the FlashProManager software on your Windows - based laptop or desktop. The starting swap calibrations in the software allow you to start the engine, but remember that tuning is necessary for optimal performance. When it comes to boost, you can get 10 PSI with the stock MAP sensor, or upgrade to 43 psi with the optional Hondata 4 bar sensor. The large injector calibration helps in fine - tuning the fuel delivery. The FlashPro has 20 hours of on - board datalogging memory, so you can keep track of your engine's performance. You can also check and clear diagnostic codes using the software. There's a security password to protect your settings. You can choose from two calibration storages in the FlashPro. Important note: In the USA, this product is only for racing vehicles that are never used on public highways. And it can only be sold to US/Canada addresses. VCM engines are not recommended for this kit. For maintenance, keep the FlashPro and its cables clean and free from damage. If you have any issues with the ECU, remember it has a 1 - year warranty, but the FlashPro is permanently locked to the supplied ECU, so don't try to use a customer - supplied ECU. Also, your power output will vary based on your engine configuration, injectors, boost, and tuning, so adjust as needed.
