The front camber kit simplifies camber adjustment, allowing you to set up and align your car perfectly for both street driving and racing. Worn bushings can significantly reduce your car's handling, but replacing them and other suspension components with our parts can make an older car feel brand - new. Our rubber bushings are stiffer than OEM ones and built to last. This kit is specifically designed for 90 - 93 Integra DA models. Note that our K - Tuned Upper Camber Arms are for lowered cars only. Do not use them to correct camber angles on race cars higher than stock. The maximum drop we've tested is 3 inches lower than stock. Using it on a setup lower than 3 inches or higher than stock may damage the balljoint. Also, remember to torque the camber plate bolts to 22 ft - lbs.
Using this K - Tuned front camber kit is a breeze. First, make sure your car is a 90 - 93 Integra DA. If your car has old and worn bushings, remove them and replace them with the parts from this kit. This will not only adjust the camber but also improve your car's handling. When installing, always keep in mind that these upper camber arms are for lowered cars. The maximum drop we've tested is 3 inches lower than stock. Avoid using it on a car higher than stock or lower than 3 inches, as it may damage the balljoint. After installation, use a torque wrench to tighten the camber plate bolts to 22 ft - lbs. For maintenance, regularly check the bushings for wear and tear. If you notice any issues, replace the parts promptly to keep your car in top - notch condition.
