The K - Tuned Power Steering Relocation Kit is a great solution for those who want to keep power steering while tidying up the engine bay. It moves the power steering pump to the original position of the factory AC compressor. This kit is suitable for 02 - 04 RSX and k - swap vehicles using an 02 - 04 PS pump, as well as 05 - 06 RSX with an 05 - 06 PS pump. You won't have to deal with the problems of electric setups anymore. It retains the factory hydraulic functionality with a clean installation. Our high - pressure line can handle the extreme pressure of the power steering system. The overflow fitting on the pump can swivel 360 degrees for the best routing of the overflow hose and custom mounting. Depending on where you mount the overflow bottle, you may need more hose, and 18' of hose is provided. The bracket has dual mounting positions for different applications, allowing you to adjust the pump's height according to clearance with the subframe and accessories. The kit includes a relocation bracket, - 6AN (for 02 - 04 RSX) or - 8AN (for 05 - 06 RSX) fitting for the power steering pump, a new swivel overflow fitting for the pump, an AN fitting for the rack, a high - pressure hose, 18' of hose for the overflow bottle and cooler, and all necessary clamps and hardware. If you use it on a k - swap car, you may need to get your own 3/8 high - pressure hose for the return from the rack to the overflow bottle. Applications include 02 - 04 RSX (KTD - PSP - 204), 05 - 06 RSX (KTD - PSP - 506), and K - Swapped EG / DC2 / EK (w/EKK2 ONLY) with 02 - 04 RSX PS Pump. Note that the power steering line is louder than stock, this kit requires removal of the AC, 05 - 06 RSX has a larger pump with greater flow and a larger diameter line and fitting at the rack, and it won't fit EK with EKK1 Mount kit.
Using the K - Tuned Power Steering Relocation Kit is straightforward. First, remove the AC as this kit requires its removal. Then, install the relocation bracket in the appropriate dual mounting position based on your vehicle's clearance needs. Connect the - 6AN or - 8AN fitting (depending on your vehicle model) to the power steering pump, and attach the new swivel overflow fitting to the pump. Connect the AN fitting to the rack and install the high - pressure hose. Use the provided 18' of hose for the overflow bottle and cooler, and add more if needed according to the mounting location of the overflow bottle. If you're using it on a k - swap car, make sure to source your own 3/8 high - pressure hose for the return from the rack to the overflow bottle. Keep in mind that the power steering line is louder than the stock one. Regularly check the connections and hoses for any signs of wear or leaks. If you notice any issues, replace the parts as necessary. Also, be aware that 05 - 06 RSX models have a larger pump and different line and fitting sizes at the rack, and the kit won't fit EK with EKK1 Mount kit.
