K-Tuned Throttle Body Inlets 90mm Throttle Body New 2019 Style

These are interchangeable inlets designed for K-Tuned Throttle Bodies. You can easily swap the standard barb fitting to a 3.5' or 4' V-Band or Vanjen fitting. No more welding throttle bodies! Just remove the 4 bolts holding the standard inlet and replace it with your chosen new inlet. You can reuse the o - ring that comes with your throttle body. Applications include the NEW 2019 Style K - Tuned 90mm Throttle Bodies, KTD - TB9 - K10, and KTD - TB9 - B10. Here are the outer diameters for different clamp sizes: for a 3in clamp, the V - Band Clamp is 3.81in and the VanJen Clamp is 3.28in; for a 3.5in clamp, the V - Band Clamp is 4.13in and the VanJen Clamp is 3.98in; for a 4in clamp, the V - Band Clamp is 4.63in and the VanJen Clamp is 4.54in.

Using these K - Tuned throttle body inlets is a breeze. First, locate the 4 bolts that hold the standard inlet in place. Remove these bolts carefully. Then, take your chosen new inlet, whether it's a V - Band or Vanjen fitting in 3.5' or 4'. Place it in the position where the old inlet was and secure it with the bolts. Remember to reuse the o - ring that came with your throttle body. When it comes to maintenance, keep the inlets clean. Regularly check the bolts for tightness to ensure a proper fit. Avoid using harsh chemicals on the inlets as it may damage the material. If you notice any signs of wear or leakage, replace the parts as soon as possible.